The Hugger™ by Custom Built Brush Co

Caution!
Visiting this web site requires a newer version of Netscape Communicator.

Visit Microsoft's Web site to obtain the newest version of Internet Explorer, or visit Netscape's Web site to obtain the newest version of Netscape Communicator.

Visiting this web site without first upgrading your browser may result in unreliable behavior.

Custom Built Brush Co.
7390 Dan Smith Road
Watervliet, MI 49098

info99@custombuiltbrush.com

Custom Built Brush: Supplier of The Hugger

THE HUGGER™
A NEW & IMPROVED BRUSH

FOR FLEX-TYPE WRAP UNITS

ATTN: CAR WASH OPERATORS:

Please read below about this new "tested and proven" brush. It is a one-piece brush 72" high with a smaller 5" diameter core, and it is rapidly becoming popular in the car wash industry

Advantages:

BETTER CLEANING ACTION because it "hugs" as it cleans, even the backs of vehicles.
ELIMINATES "CLEANING MISSES."
Mirror folding is NEARLY ELIMINATED.

SUCCESS COMES FROM the use of a smaller core with a special brush density.
EFFICIENT CLEANING aided by use of Wavy-Cut^® material on bottom and straight cut on top.
FAST INSTALLATION. Merely tighten 4 vertical bolts (maximum 3 minutes).
Available in solid or mixed colors of blue, red, green, black, yellow or gray.

Listen to what they are saying about this brush:

The cleaning action of the Hugger, as used on a Flex-Type Wrap, is really great. Much of its cleaning success is due to the fact that it stays against the vehicle throughout its entire cycle. The use of a heavy pack of wavy-cut cloth in the rocker area also helps a lot.

I like the simplicity of the brush design including the feature that by merely tightening 4 vertical bolts in the top of the brush (this requires only about 3 minutes) the brush is installed and ready to clean.

Tom and Ryan Essenburg
Quality Car Washes
Holland/Grand Rapids, Michigan

I am really impressed with the great cleaning action, even on the backs of vehicles, of this new brush.

It cleans better because of its smaller diameter core and special cloth density (including wavy-cut cloth) causes it to "hug" the vehicles. At the same time, it eliminates cleaning "misses" and also eliminates the folding of mirrors.

We will continue to offer this brush as our standard brush on our equipment in the future.

Velimir (Willy) Vidakovich
A.V.W. Equipment Co., Inc.
Maywood, Illinois

CUSTOM BUILT BRUSH CO.
7390 Dan Smith Road
Watervliet, Michigan 49098
Phone: 269-463-3171
Fax: 269-463-7442
info99@custombuiltbrush.com

Wave Goodbye to Dirt® with WAVY CUT® Cloth® and THE HUGGER™